Towbar Toyota YARIS Yaris III Phase 1 from 10/2011 to 07/2014 : Horizontal detachable Towbar incl. 7 pin universal wiring kit UMBRA RIMORCHI

Toyota
›
YARIS
›

Towing capacity (in kg)	900
Vertical load (in kg)	45
Removable	SANS OUTILS
Bumper cut's	NOT VISIBLE
Bumper removal	NO
Compatibility	Toyota YARIS
Restriction	Hybride

HORIZONTAL DETACHABLE TOWBAR

UMBRA RIMORCHI has been an Italian manufacturer of towbars since 1976. As an original equipment manufacturer for several makes of vehicle, UMBRA RIMORCHI is the first company in the towbar sector to be certified by the ISO-9001 standard. Today, the brand has an international reach and is exported to over 40 countries worldwide.

The UMBRA RIMORCHI (RDSOH) towbar, which can be removed horizontally without tools, is a towbar that combines practicality, ergonomics and economy. The ball-and-socket joint is designed to be fixed horizontally, and is very easy to remove.

There's no need to use tools to remove your ball joint - it's simply attached and removed using the handle supplied. After towing your trailer, caravan or bike carrier, you can remove your ball joint and store it in its bag.

Installation of an RDSOH :

7-PIN BEAM+ ELECTRONIC BOX FOR MULTIPLEX VEHICLE

The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.

The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.

You also have a picture of the assembly instructions. The approximate time to assemble a wiring kit is about 15-30 minutes.

BEAM CHARACTERISTICS

Number of pins	7
Reprogramming	No
Compatibility Bulb	Alltypes : traditional, LED, à dual intensity
Output protections	- outputs protected against short circuits -Reverse polarity protection -IP50 Protection
Pre-mounted terminal on the box	Yes
Warranty	2 years

The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
In addition, the wiring kit does not affect the operation of the reversing radars.
The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).

BENEFITS AND SECURITY

Detachable ball hitch :

The RDSOH hitch offers excellent value for money
Removable ball joint with handle
A double coat of paint is applied to the hitch to prevent oxidation of the fittings and the vehicle
Hole centres and alignments are designed specifically for your vehicle
Detailed instructions
Complete kit
Stable, fixed towbar.
Made in Italy

Wiring Kit

Allows you to supply electricity to the lights of your trailer and bike carrier
No reprogramming required
Fits all multiplexed vehicles
Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
Power wire (more permanent) is 5.5m long
Pre-mounted terminal on the trailer socket earth

UMBRA RIMORCHI hitches comply with all the European standards in force, if you want to know more about les the certifications, strandards and guarantees of UMBRA RIMORCHI hitches click here

CONTENTS OF THE PACK

Sturdy steel hardware
Fasteners
Ball joint cover
Beam support
RDSOH ball joint
Assembly instructions
7-pin wiring kit + V7 relay box + Fixing + Assembly instructions

ACCESSORIES

7 Pin to 13 Pin Adaptor
Adaptateur 7 broches vers 13 broches 39.9€ Find out more

Security lock for horizontally detachable towbar Umbra Rimorchi
24.99€ Find out more

Tow ball Bag Umbra rimorchi
14.99€ Find out more

Customers who bought this article were also interested in :

Notice: Undefined index: carpratik_marque_attelage_titre_en in /var/www/html/preprod/languages/en/fiche_produit.php on line 952

Notice: Undefined index: carpratik_modele_attelage_produit_titre_en in /var/www/html/preprod/languages/en/fiche_produit.php on line 953