Towbar Hyundai I 30 from 09/2007 to 02/2012 : Swan neck towbar incl. 7 pin universal wiring kit IMIOLA 

Swan neck towbar Imiola

The IMIOLA swan neck towbar is the ideal solution for frequent use.

Designed specifically for your vehicle, the swan neck towbar allows you to tow any type of trailer, bike carrier, boat carrier, caravan, etc. The swan neck towbar is more aesthetically pleasing than the angled towbar, and with this towbar it is also possible to remove your towbar after use (using a simple English key).



In addition to strictly respecting the alignment and centre distances of the holes on the chassis of your vehicle, this towbar is protected against all external aggressions, and in particular climatic ones, by a cathodic immersion varnish (KTL), which prevents the oxidation of the towbar and consequently the chassis of your vehicle.
All towbars are tested and approved in accordance with Directive 94/20 EC and 55 CER.
The assembly is made easy for you thanks to the assembly manual specific to your vehicle with pictorial descriptions. 

IMIOLA

7-PIN WIRING KIT

The ISO-7B Towbar Wiring kit is the economical and convenient way to power your trailer lights, bike rack or other towing accessories. While remaining economical, the ready to install 7-pin wiring kit makes it easy to install on all non-multiplexed vehicles.

The ISO-7B does not require any reprogramming of your vehicle. So unlike the specific wiring kit you don't have to go to your manufacturer or to a garage to reprogram your car.

You also have a picture of the assembly instructions.

WIRING KIT CHARACTERISTICS

Number of pins	7
Reprogramming	No
Light Bulb Compatibility	All types: traditional, LED, double intensity
Output protection	- outputs protected against short circuits - Reverse polarity protection - IP50 protection
Pod pre-mounted on the box	yes
Warranty	2 years

• The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
• In addition,the wiring kit does not affect the operation of the reversing radars.
• The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).

BENEFITS AND SECURITY

Electrical kit

 

• Supplies electricity to the lights on your trailer and bike carrier
• No reprogramming required
• Fits all non-multiplexed vehicles
• Supplied with 2400mm sheathed wires
• Lug pre-mounted on the ground of the trailer socket

TUV certification : ISO 9001:2008 system certificate

CONTENT OF THE PACK

• Robust steel fittings
• Bolts and nuts
• Ball joint cover
• Wiring kit holder
• Swan neck towbar ball joint
• Assembly instructions
• 7-pin wiring kit + Fixing + Assembly instructions

ACCESSORIES