Towbar Volkswagen CADDY / CADDY MAXI 4X2 Phase V from 09/2020 to today : Fixed swan neck Towbar incl. 7 pin Universal Multiplex Wiring kit UMBRA RIMORCHI 

FIXED SWAN NECK TOWBAR WITH 7 PIN UNIVERSAL MULTIPLEX WIRING KIT

UMBRA RIMORCHI has been an Italian hitch manufacturer since 1976 and is the first company in the hitch sector to be certified by the ISO-9001 standard. Today the brand has an international reach and is exported to more than 40 countries worldwide. The UMBRA RIMORCHI gooseneck hitch is an economical solution, ideal for occasional use, or if you do not wish to remove your ball joint after each use. Indeed, here the ball joint is fixed on the fitting by screws and bolts, this one can be removed with a simple spanner RDSOH








This attachment system will allow you to tow your trailer, caravan or bike carrier safely and without ruining your money. This gooseneck hitch is a best seller from Umbra Rimorchi.

7-PIN BEAM+ ELECTRONIC BOX FOR MULTIPLEX VEHICLE

The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.

The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.

You also have a picture of the assembly instructions. The approximate time to assemble a wiring kit is about 15-30 minutes.

BEAM CHARACTERISTICS

Number of pins	7
Reprogramming	No
Compatibility Bulb	Alltypes : traditional, LED, à dual intensity
Output protections	- outputs protected against short circuits -Reverse polarity protection -IP50 Protection
Pre-mounted terminal on the box	Yes
Warranty	2 years

• The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
• In addition, the wiring kit does not affect the operation of the reversing radars.
• The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).

BENEFITS AND SECURITY

• Complies with all current European standards
• Gooseneck hitch offers excellent value for money
• Ball joint can be removed with tools
• A double coat of paint is applied to the hitch to prevent oxidation of the fittings and the vehicle
• Hole centres and alignments are designed specifically for your vehicle
• Detailed instructions
• Stable, fixed hitch, the gooseneck ball joint is fixed to the hitch using 2 large HM16 screws or 4 medium-sized HM10 screws (depending on model)
• Made in Italy

Wiring Kit

• Allows you to supply electricity to the lights of your trailer and bike carrier
• No reprogramming required
• Fits all multiplexed vehicles
• Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
• Power wire (more permanent) is 5.5m long
• Pre-mounted terminal on the trailer socket earth

UMBRA RIMORCHI hitches comply with all the European standards in force, if you want to know more about les the certifications, strandards and guarantees of UMBRA RIMORCHI hitches click here

CONTENTS OF THE PACK

• Gooseneck hitch 
• Heavy-duty steel fittings 
• Bolts and nuts 
• Ball joint cover 
• Beam holder 
• Assembly instructions 
• 7-pin wiring harness + V7 relay box + Fixing + Assembly instructions

ACCESSORIES