| Towing capacity (in kg) |
2500 |
| Vertical load (in kg) |
100 |
| Removable |
AVEC OUTILS |
| Bumper cut's |
|
| Bumper removal |
|
| Compatibility |
Renault Master traction |
| Restriction |
Aucune (compatible avec toutes les versions) |
FLANGE BALL TOWBAR IMIOLA
The
classic IMIOLA Flange ball Towbar (with standard angled ball) is a practical and economical solution. This coupling system is very popular with professionals as it allow any type of accessory to be fitted on a ball or screwed plate and the ball is adjustable in height via its screwed plate.
Here the coupling includes a universal ball joint
in square (90°) with a 50mm diameter (universal diameter).
The
screwed plate fixed on the Towbar will allow you to adapt all types of trailer coupling accessories such as:
Finally, the ball joint is
more robust, which allows you to tow
heavier loads than with a conventional Towbar.
7-PIN + ELECTRONIC BOX FOR MULTIPLEX VEHICLE
The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.
The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.
You also have a picture of the assembly instructions. The approximate time to assemble a wiring kit is about 15-30 minutes.
WIRING KIT CHARACTERISTICS
|
Number of pins |
7 |
|
Reprogramming |
No |
|
Compatibility Bulb |
Alltypes : traditional, LED, à dual intensity |
|
Output protections |
- outputs protected against short circuits
-Reverse polarity protection
-IP50 Protection |
|
Pre-mounted terminal on the box |
Yes |
|
Warranty |
2 years |
-
The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
-
In addition, the wiring kit does not affect the operation of the reversing radars.
-
The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).
BENEFITS AND SECURITY
Flange ball Towbar
-
The IMIOLA Flange ball Towbar has a lifetime warranty
-
Ideal for commercial vehicles and their towing accessories
-
The shape of the "angled" ball allows the adaptation of regular pintle hook, Combination Pintle Hook as well as Jaw and Pin coupling or towing heads
-
Allows you to tow a maximum load with your Towbar
-
Designed for professionals, this Towbar allows you to adapt any type of accessory on a target plate
-
The ball joint can be removed with tools (2 HM16 bolts to remove)
-
The flange ball towbar has an excellent value for money
-
100% European manufacture
-
Complies with the European standard 94/20
-
The ball joint is solidly fixed on the Towbar thanks to 2 large HM16 screws or 4 medium HM10 screws
-
IMIOLA guarantees its Towbars for a period of 3 years
-
Products tested by the PIMOT laboratory (Institute of Automotive Industry)
-
Its towbars are designed and tested according to the E20 standard
-
Allows you to tow a maximum load with your Towbar
Electrical kit
-
Supplies electricity to the lights on your trailer and bike carrier
-
No reprogramming required
-
Fits all non-multiplexed vehicles
-
Supplied with 2400mm sheathed wires
-
Power wire (more permanent) is 5.5m long
TUV certification : ISO 9001:2008 system certificate
CONTENT OF THE PACK
-
Angled ball joint
-
Fittings
-
Nuts and bolts
-
Beam support
-
Hitch assembly instructions
-
7-pin towing bracket V7 relay box + Fixing + Assembly instructions
03 20 09 37 82
