| Towing capacity (in kg) | 3500 |
| Vertical load (in kg) | 120 |
| Removable | AVEC OUTILS |
| Bumper cut's | |
| Bumper removal |
The ISO-7B Towbar Wiring kit is the economical and convenient way to power your trailer lights, bike rack or other towing accessories. While remaining economical, the ready to install 7-pin wiring kit makes it easy to install on all non-multiplexed vehicles.
The ISO-7B does not require any reprogramming of your vehicle. So unlike the specific wiring kit you don't have to go to your manufacturer or to a garage to reprogram your car.
You also have a picture of the assembly instructions.
| Supports PWM (pulse-with modulation) multiplexed system/span> | No |
| Requires vehicle reprogramming | No |
| Bulb types | Traditional only. |
| Number of pins | 7 |
| Separates PWM signals (stop/position or fog/position) | Yes |
| Managing reversing radars | No: only specific beams manage reversing radars |
| Operating voltage | 9V to 15V |
| Requires a permanent | No |
| Operating temperature | -40°C to +85°C |
| Consumption in standby mode | Very low <3 mA |
| Support | 4x21W support on the stop light channel and 2x21W support on all channels |
| Output protection |
- Outputs protected against short circuits - Reverse polarity protected - IP50 protection |
| Wiring cut-out for mounting | Yes |
| Mounting base with screw contacts | Yes |
| Warranty | 2-year |
03 20 09 37 82
