Towbar : GDW Fixed swan neck Towbar incl. 7 pin universal multiplex wiring kit

Mercedes CLASSE V

Fixed swan neck Towbar incl. 7 pin universal multiplex wiring kit

Notice: Undefined index: carpratik_produit_media_titre_en in /var/www/html/preprod/languages/en/fiche_produit.php on line 440

Notice: Undefined index: carpratik_produit_media_titre_en in /var/www/html/preprod/languages/en/fiche_produit.php on line 440

Monter faisceau attache remorque multiplexe

251 €

In stock Available

Ref : 2044_KITMIN

Lifetime warranty
Pay in 3 instalments

Quantity : -+

Towing capacity (in kg)	2500
Vertical load (in kg)	150
Removable	AVEC OUTILS
Bumper cut's	NOT VISIBLE
Bumper removal	-

FIXED SWAN NECK TOWBAR WITH 7 PIN UNIVERSAL MULTIPLEX WIRING KIT

The manufacturer BOISNIER GDW, is specialising in the production of towbars since 1965, has put all its expertise into the design of a more aesthetic and safer towbar. Moreover, you will benefit from a meticulous finish with a second coat of paint to avoid oxidation of your towbar.

The fixed swan neck trowbar is more aesthetic than the angled ball joint and can be used to tow all types of trailers (bike carrier, boat carrier, caravan, etc.)

All BOISNIER GDW towbars are tested and approved according to the current standards: ISO 3853/ISO 1176/ISO 1103 and the European directive 94/20/EC and R55.

7-PIN BEAM+ ELECTRONIC BOX FOR MULTIPLEX VEHICLE

The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.

The matic V7 relay does not require any reprogramming of your vehicle. So unlike the specific wiring kit, you don't have to go to your manufacturer or to a garage to reprogram your car.

You also have a picture of the assembly instructions. The approximate time to assemble a wiring kit is about 15-30 minutes.

BEAM CHARACTERISTICS

Number of pins	7
Reprogramming	No
Compatibility Bulb	Alltypes : traditional, LED, à dual intensity
Output protections	- outputs protected against short circuits -Reverse polarity protection -IP50 Protection
Pre-mounted terminal on the box	Yes
Warranty	2 years

The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
In addition, the wiring kit does not affect the operation of the reversing radars.
The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).

BENEFITS AND SECURITY

Towbar

Complies with all applicable European standards
Fixed swan neck offers excellent value for money
Ball joint can be removed with tools
A double coat of paint is applied to the towbar to avoid oxidation of the fitting and the vehicle
The centre distances and hole alignments are designed specifically for your vehicle
Detailed instructions
Stable, fixed towbar, the swan neck ball is fixed to the towbar with 2 large HM16 screws or 4 medium HM10 screws (depending on model)
Made in France
Approved according to the European standard EC94/20 with fixing on the foreseen anchorage points
The ball is firmly fixed to the towbar with 2 large HM16 screws BOISNIER GDW guarantees its towbars for a period of 3 years
Certified ISO 3853/ISO 1176/ISO 1103

Wiring Kit

Allows you to supply electricity to the lights of your trailer and bike carrier
No reprogramming required
Fits all multiplexed vehicles
Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
Power wire (more permanent) is 5.5m long
Pre-mounted terminal on the trailer socket earth

GDW hitches comply with all the European standards in force, if you want to know more about les the certifications, strandards and guarantees of GDW hitches click here