| Towing capacity (in kg) |
1350 |
| Vertical load (in kg) |
85 |
| Removable |
AVEC OUTILS |
| Bumper cut's |
|
| Bumper removal |
|
| Compatibility |
Hybrid |
Fixed swan neck Towbar incl. 7 pin universal multiplex wiring kit
Specialising in the manufacture of towbars, Aragon designs trailer hitches of impeccable quality and is constantly innovating. That's why this towbar manufacturer has become an original equipment manufacturer for many carmakers. Present in over 60 countries across 5 continents.
In addition to complying with current European standards, and in order to offer top quality towbars, Aragon holds other quality certifications:
-
UNE-EN ISO 9001: 2015,certification, which ensures continuous improvement in areas such as customer satisfaction, compliance with legal requirements, staff qualifications and the use of new technologies.
-
ISO 12944-6, a standard for optimum paint quality to prevent oxidation of the coupling and the vehicle.
-
Certificate of conformity
What is a swan neck hitch ?
Designed
specifically for your vehicle, the gooseneck hitch is
more aesthetically pleasing than the angled hitch and can be used to tow any type of trailer (bike carrier, boat carrier, caravan, etc.). In addition to scrupulously respecting the alignment and centre-to-centre distances of the holes on your vehicle's chassis, this hitch
is protected against all external aggressions, particularly climatic, by a cathodic immersion varnish (KTL), which
prevents oxidation of the fitting and the vehicle.
7-PIN BEAM+ ELECTRONIC BOX FOR MULTIPLEX VEHICLE
The towbar electric wiring kit the practical solution to power your trailer lights, bike carrier or any other towing accessory. While remaining economical, the ready-to-install 7-pin wiring kit with electronic box allows for easy installation on all multiplexed vehicles.
The Aragon PRO 7 PLUS harness does not require any reprogramming of your vehicle, or going to a suitcase. So, unlike the specific harness, you don't have to go to your manufacturer or a garage with a suitcase to reprogram your car.
BEAM CHARACTERISTICS
|
Number of pins |
7 |
|
Reprogramming |
No |
|
Compatibility Bulb |
Alltypes : traditional, LED, à dual intensity |
|
Output protections |
- outputs protected against short circuits
-Reverse polarity protection
-IP50 Protection |
|
Pre-mounted terminal on the box |
Yes |
|
Warranty |
2 years |
-
The wiring kit is connected to the rear lights, so no reprogramming is required, making it easy to fit.
-
In addition, the wiring kit does not affect the operation of the reversing radars.
-
The wiring kit allows you to transfer information from your lights to your trailer (turn signals, brake lights, etc.).
BENEFITS AND SECURITY
Fixed Swan neck towbar :
-
Aragon gooseneck hitch is guaranteed for life
-
Specific to your vehicle
-
Ideal for towing your trailer, bike carrier or caravan
-
Your gooseneck ball joint can be easily removed by unscrewing the HM16 screws
-
The gooseneck hitch offers the best value for money for your daily towing needs
-
100% European manufacture (Spain and Italy)
-
Complies with European standard 94/20
-
The ball joint is firmly attached to the hitch using 2 large HM16 screws.
-
Aragon guarantees its trailer hitches for 5 years (+ extended lifetime guarantee offered by Carpratik)
-
Products tested by the PIMOT laboratory (Institut d'Industrie Automobile)
-
Its towbars are designed and tested in accordance with the E20 standard
-
Allows you to tow a maximum load with your trailer hitch
Certifications :
UNE-EN ISO 9001: 2015
ISO 12944-6
Wiring Kit :
-
Allows you to supply electricity to the lights of your trailer and bike carrier
-
No reprogramming required
-
Fits all multiplexed vehicles
-
Comes pre-wired with 2400mm sheathed wires, allowing the module to be mounted on either side
-
Power wire (more permanent) is 5.5m long
-
Pre-mounted terminal on the trailer socket earth
ARAGON towbars comply with all current European standards. To find out more about the ARAGON towbar certifications, standards and guarantees, click here.
CONTENTS OF THE PACK
-
Gooseneck hitch
-
Robust steel fittings
-
Bolts and nuts
-
Ball joint cover
-
Beam support
-
Assembly instructions
-
7-pin wiring harness + V7 relay box + Fixing + Assembly instructions
03 20 09 37 82
